New article codes


GN 113 St. Steel-Ball lock pins (New: GN 113.6) e.g.: GN 113-5-10  =>New: GN 113.6-5-10

GN 113.2 St. Steel-Ball lock pins (New: GN 113.5) e.g.: GN 113.2-6-10  => New: GN 113.5-6-1

GN 114 Pins with axial locks Removed from the Ganter-catalogue !

GN 114.1 Pins with axial locks (New: GN 114.2) e.g.: GN 114.1-10-30  => New: GN 114.2-10-30

GN 114.5 St. Steel-Pins with axial locks (New: GN 114.3) e.g.: GN 114.5-8-16  => New: GN 114.3-8-16

GN 115 Locks, Type VK e.g.: GN 115-VK-4  => New: GN 115-VK7-4

GN 119  Door locks, Type VK e.g.: GN 119-VK-A3  => New: GN 119-VK7-A3

GN 119 St. Steel-Door locks, Type VK e.g.: GN 119-VK-A3-NI  => New: GN 119-VK7-A3-NI

GN 119.1 Keys renamed in GN 119.2

GN 187 Serrated locking plates (New: GN 187.4) e.g.: GN 187-27-C-NI  => New: GN 187.4-27-60-C-NI

GN 237: Aluminium-Hinges e.g.: GN 237-AL-40-40-A => New: GN 237-AL-40-40-A-EL

GN 237: Zind die cast-Hinges e.g.: GN 237-ZD-40-40-A => New: GN 237-ZD-40-40-A-SW (and/or GN 237-ZD-40-40-A-SR)

GN 237.5: St. Steel-Hinges (New: GN 237) e.g.: GN 237.5-40-40 => New: GN 237-NI-40-40-A-GS

GN 252: Blanking plugs e.g.: GN 252-M12x1,5 => New: GN 252-M12x1,5-A

GN 317: Ratschet spanner (New: GN 316) e.g.: GN 317-12-M8=> New: GN 316-12-M8

GN 331.1: Cables with connector (New: GN 330) e.g.: GN 331.1-M12-12-G-5 => New: GN 330-M12-12-G-5

GN 350.2: Levelling sets e.g.: GN 350.2-80-39-ST => New: GN 350.2-80-39-56-ST

GN 411: Centring bore clamps (New: GN 411.2) e.g.: GN 411-30,5-K => New: GN 411.2-30,5-K

GN 424: St. Steel-U-handles (New: GN 424.5) e.g.: GN 424-10-128 => New: GN 424.5-10-128

GN 425.4 Folding handles with recessed tray => Removed from the Ganter-catalogue !

Replaced by GN 425.8 Folding handles with recessed tray !


GN 425.6: Aluminium U-handles (Neu: GN 425-AL)
e.g.: GN 425.6- 8-88-EL => Neu: GN 425-AL- 8-88-EL

GN 528: U-handles e.g.: GN 528-PA-235-SW => New: GN 528-PA-235-10,5-SW

GN 565.2: Inlined cabinet "U" handles: e.g.: GN 565.2-20-112-SW=> New: GN 565.2-20-112-A-SW

GN 597: Revolving mushroom shaped handles (New: GN 597.1) e.g.: GN 597-45-M10 => New: GN 597.1-45-64-M10

GN 598.7: Retractable safety handles (New: GN 798.7) e.g.: GN 598.7-KU-23=> New: GN 798.7-KT-24

GN 706: Semi-split set collars (New: GN 706.2) e.g.: GN 706-36-B16-ST => New: GN 706.2-36-B16-ST

GN 707: Split set collars (New: GN 707.2) e.g.: GN 707-65-B40-ST => New: GN 707.2-65-B40-ST

GN 708 Clampiung bolts renamed in GN 708.1 ! 

GN 717 Steel-Indexing plungers e.g.: GN 717-4-A => New: GN 717-4-M6-A-ST

GN 717 St. Steel-Indexing plungers e.g.: GN 717-4-A-NI => New: GN 717-4-M6-A-NI

GN 718: Softline-Mushroom shaped handles (New: GN 718.1) e.g.: GN 718-45-B10-S => New: GN 718.1-45-65-B10-G

GN 734: Stainless Steel-Wing nuts (New: GN 834) e.g.: GN 734-45-M6-E => New: GN 834-46-M6-E

GN 770: Guide bushes (New: DIN 172) e.g.: GN 770-6-16-A => New: DIN 172-B6-16-A

GN 771: Guide bushes (New: DIN 179) e.g.: GN 771-6-20 => New: DIN 179-B6-16-A

GN 852.1 Latch clamps, with locking mechanism (New: GN 858)
New: GN 852.1-1400-T5  => GN 858-1400-T5

GN 908 Universal joints renamed in GN 9080 ! 

GN 918: Eccentrical cams e.g.: GN 918-50-KV => New: GN 918.-50-KV-R

GN 918.1: Clamping bolts e.g.: GN 918.1-50-KV => New: GN 918.1-50-KV-R

GN 918.2: Clamping bolts e.g.: GN 918.2-50-KV => New: GN 918.2-50-KV-R

GN 918.5: St. Steel-Eccentrical cams e.g.: GN 918-50-KV => New: GN 918.-50-KV-R

GN 918.6: St. Steel-Clamping bolts e.g.: GN 918.1-50-KV => New: GN 918.1-50-KV-R

GN 918.7: St. Steel-Clamping bolts e.g.: GN 918.2-50-KV => New: GN 918.2-50-KV-R

GN 920: Wedge clamps (Neu: GN 920.1) e.g.: GN 920-M12-40-RF => New: GN 920.1-M12-40-RF

GN 921: Wedge clamps Removed from the Ganter-catalogue !

GN 921.1: Locking plate for wedge clamps Removed from the Ganter-catalogue !

GN 952: Position indicators Removed from the Ganter-catalogue !

GN 952.5: Clamping plates for Position indicators Removed from the Ganter-catalogue !

GN 5329: Knurled knobs Removed from the Ganter-catalogue !

GN 5337.7: Star knobs Removed from the Ganter-catalogue !

GN 6336.7: Hand knobs with indexing plunger (New: 7336.7) e.g.: GN 6336.7-40-M12x1,5-6 => New: GN 7336.7-42-M12x1,5-6

Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.