GN 1404 Telescopic slides with partial extension, load capacity up to 780 N

Photo

GN 1404 Telescopic slides with partial extension, load capacity up to 780 N

Product description

Information

Telescopic slides GN 1404 are installed vertically and in pairs. The stroke reaches ≈ 75 % of the nominal length l1 (partial extension). The rubber stops of type E dampen the impact of the slide in the two end positions and takes on the locking function of the back stop position. This feature is noticeable through a slight resistance on opening and closing. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements.

The telescopic slides are delivered in pairs. They can be installed on the extension on either the left or right side due to the mechanics. All mounting holes are easy to reach without auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.

Specification

Slide profile
Steel, zinc plated, blue passivatedZB

Bearings
Roller bearing steel, hardened

Ball cage
Steel, zinc plated

Rubber stop
Plastic / Elastomer

Operating temperature -20 °C to 100 °C




RoHS compliant

On request

other lengths and hole spacing
other attachment options
with rubber stop (without locking device)
other surfaces
with support bracket
with retraction dampening, external

Technical drawing

Hide technical drawing
GN 1404 Telescopic slides with partial extension, load capacity up to 780 N sketch

Article options / Table

Type

Ewith rubber stop, locking device in back

Identification no.

3Fastening using through-holes on external slide and countersunk holes on inner slide
Show / Hide columns
l1l2 +2/-2
Stroke
l3Fs per pair in N
at 10,000 cycles

at 100,000 cycles
300205490780600
350239574630490
400289674540420
450339774460360
500373858540420
6004571042560430
7005411226560430

Build & Price

Length l1
Type

Identification no.

Finish

Selected Part (How to order)

Weight: 0,900 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS compliant: Yes
This article conforms to RoHS, which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 150 Euro -> 10 % discount
from 250 Euro -> 20 % discount
from 350 Euro -> 30 % discount
All prices in accordance with our price list No. 51, valid from 1 February 2018, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.