GN 808.3 Universal joint shafts with needle bearing with longitudinal compensation

Photo

Product description

Information

Universal joint shafts with needle bearing GN 808.3 do not only bridge the misaligenment of two shafts, they also provide a length compensation which, in turn, allows the appropriate extraction length l2 as factor of the total length l1. The power transmission is achive-bed by two universal joints DIN 808 (type EW) a splined shaft and a sliding sleeve.

It is important to check the accuracy when connecting the splined shaft to the sliding sleeve.
The markings -> <- have to be opposite to each other. Any kind of misconnection leads to an inhomogeneous output and to a quick abrasion.

Specification

Steel
blank

Joint bearing areas, pins
case hardened




RoHS

On request

different lengths l1 - l2
Bores without keyway
Bores with square
with other or unequal bores

Technical drawing

Hide technical drawing
GN 808.3 Universal joint shafts with needle bearing sketch

Article options / Table

Bore code

Kwith keyway
Show / Hide columns
d1d2 H7
Bore
l1 - l2d3l3
Guide
length
l5+1
max. assembly
length of the shaft
22K 10140-30160-40180-60-22304812
25K 12160-30180-45200-70250-10526405613
28K 14170-30200-60220-80280-14029406013
32K 16190-30240-80275-115380-21032406816
36K 18230-50270-100290-110400-22037407417
42K 20250-50320-120420-220-42458218
45K 22270-50330-100470-240-47509522
50K 25295-50350-100420-170-525010826
58K 30330-50400-110--586012229

Build & Price

Outside diameter d1
Bore code

Bore d2
l1 - l2

Selected Part (How to order)

Weight: 0,320 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 150,00 Euro -> 10 % discount
from 250,00 Euro -> 20 % discount
from 350,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 51, valid from 1 February 2018, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.