GN 808.2 Universal joint shafts with friction bearing with longitudinal compensation


Product description


Universal joint shafts with friction bearing GN 808.2 not only join the offset between two shafts, but also enable the alignment of lengths, which depending on the overall length l1 enables the corresponding extraction length l2. The power transmission is achieved by two universal joints DIN 808 (type EG) a splined shaft and a sliding sleeve.

It is important to check the accuracy when connec-ting the splined shaft to the sliding sleeve:
The markings -> <- have to be opposite to each other. Any kind of misconnection leads to an inhomogeneous output and to a quick abrasion.


Steel blank

Joint bearing areas / pins / bearing sleeves
case hardened

RoHS compliant

On request

different lengths l1 - l2
Bores without keyway
Bores with square
with other or unequal bores

Technical drawing

Hide technical drawing
GN 808.2 Universal joint shafts with friction bearing sketch

Article options / Table

Bore code

Kwith keyway
Show / Hide columns
d1d2 H7
l1 - l2d3l3
max. assembly
length of the shaft
22K 10140-30160-40180-60-22304812
25K 12160-30180-45200-70250-10526405613
28K 14170-30200-60220-80280-14029406013
32K 16190-30240-80275-115380-21032406816
36K 18230-50270-100290-110400-22037407417
42K 20250-50320-120420-220-42458218
45K 22270-50330-100470-240-47509522
50K 25295-50350-100420-170-525010826
58K 30330-50400-110--586012229

Build & Price

Outside diameter d1
Bore code

Bore d2
l1 - l2

Selected Part (How to order)

Weight: 0,310 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS compliant: Yes
This article conforms to RoHS, which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 150 Euro -> 10 % discount
from 250 Euro -> 20 % discount
from 350 Euro -> 30 % discount
All prices in accordance with our price list No. 51, valid from 1 February 2018, plus VAT only valid for Germany.

CAD data


For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...


Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.


Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.