GN 5862 Load hooks

Photo

Product description

Information

Load hooks GN 5862 rotate running in ball bearings. The freely rotating hook allows the bolts to hold loads in any allowed tensile direction.

The rated load carrying capacity listed in the table is shown clearly on bearing case. It applies to the most unfavourable load application of the load types listed opposite.

Load hooks GN 5862 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

Specification

Hook
Steel 1.6540
  • high-tensile tempered
  • 100% electro magnetic tensile tested to EN 1677
  • plastic coated, pink

Safety catch
Steel 1.6541
  • forged
  • high-tensile tempered
  • 100% electro magnetic tensile tested

Bearing case
Steel 1.6541
  • forged
  • high-tensile tempered
  • 100% electro magnetic tensile tested
  • zinc plated, blue passivated

Threaded stud
Steel, high-tensile tempered
Finish: Delta Tone


RoHS

On request

other screw lengths l

Technical drawing

Hide technical drawing
GN 5862 Load hooks sketch

Article options / Table

Show / Hide columns
d1d2Length leh1h2h3h4h5k1k2k3k4csTightening
torque
in Nm
Nominal
Load
in t
M 124,81840129116754149125225821836100,63
M 167,424461671479750631673321052541301,5
M 209,6306121518712661782095421363055702,5
M 2412,136782632271507796261185216335701504
M 3015,6459530426717493119301355718940852255
M 361954100359310208102137361616822748904108

Build & Price

Thread d1
Length l

Load capacity

Method of
mounting

Number

1

1

2

2

2

2

2

3 and 4

3 and 4

3 and 4

Angles of
inclination

90°

90°

0° to 45°

45° to 60°

asymm.

0° to 45°

45° to 60°

asymm.

Factor

1

1

2

2

1,4

1

1

2,1

1,5

1

M 12
M 16
M 20
M 24
M 30
M 36

0,63 t
1,50 t
2,50 t
4,00 t
6,70 t
10,00t

0,63 t
1,50 t
2,50 t
4,00 t
6,70 t
10,00t

1,26 t
3,00 t
5,00 t
8,00 t
13,40t
20,00t

1,26 t
3,00 t
5,00 t
8,00 t
10,00t
16,00t

0,88 t
2,10 t
3,50 t
5,60 t
7,00 t
11,20t

0,63 t
1,50 t
2,50 t
4,00 t
5,00 t
8,00 t

0,63 t
1,50 t
2,50 t
4,00 t
5,00 t
8,00 t

1,32 t
3,15 t
5,25 t
8,40 t
10,50t
16,80t

0,95 t
2,25 t
3,75 t
6,00 t
7,50 t
12,00t

0,63 t
1,50 t
2,50 t
4,00 t
5,00 t
8,00 t

Safety instructions

The above load capacity table shows the maximum loads in metric tonnes as factor of the load ring type and at an operating temperature range of –40 °C to +200 °C, with a safety coefficient of 4 taken into account for all values.
The load hooks GN 5862 may be used only if it is bolted with the minimum screw-in depth which depends on the material and if the bolt contact surface is plane and fixed at a right angle to the tap hole.
If permanently mounted in place, the load hooks must rotate freely by 360° and must not rest on edges or other fixture, e.g. crane hooks. The load hooks are not suitable for permanent rotary movement under load exposure.

Selected Part (How to order)

Weight: 0,400 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 Euro -> 10 % discount
from 275,00 Euro -> 20 % discount
from 375,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.