GN 345.5 Stainless Steel-Levelling feet Threaded stud Stainless steel / Foot plastic with two fixing holes

Photo

GN 345.5 Levelling feet, Plastic / Stainless Steel Type: B - with nut, without rubber underlay
ELESA original design LV.F-SST
Type: B - with nut, without rubber underlay
GN 345.5 Levelling feet, Plastic / Stainless Steel Type: B - with nut, without rubber underlay GN 345.5 Levelling feet, Plastic / Stainless Steel Type: A - without nut, without rubber underlay GN 345.5 Levelling feet, Plastic / Stainless Steel Type: AG - without nut, with rubber underlay GN 345.5 Levelling feet, Plastic / Stainless Steel Type: BG - with nut, with rubber underlay

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

  • corrosion-resistant
  • precise fit
  • environmentally friendly
Show all Stainless Steel products

Product description

Information

Stainless Steel-Levelling feet GN 345.5 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.

The values given in the table regarding the static load capacity serve as a guide line only and if these are exceeded serious permanent deformation or breakage of the plastic socket could occur.

The above values have been arrived at by a series of tests whereby a limited number of levelling feet were subjected for a limited time to a vertical static load to the feet.

The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

The fixing holes are closed by a thin plastic layer, which may be easily punctured.

Levelling feet GN GN 345.5 are supplied assembled, but are removable.

Specification

Foot
Plastic Technopolymer (Polyamide PA)
  • glass fiber reinforced
  • black, matte
  • temperature resistant up to 100 °C

Threaded stud
Stainless Steel
AISI 303

Hexagon nut ISO 4032
Stainless Steel
AISI 304

Rubber underlay (NBR)
70 Shore A, black



RoHS compliant

Technical drawing

Hide technical drawing
GN 345.5 Levelling feet, Plastic / Stainless Steel sketch

Article options / Table

Type

Awithout nut, without rubber underlay
Bwith nut, without rubber underlay
AGwithout nut, with rubber underlay
BGwith nut, with rubber underlay
Show / Hide columns
d1d2l1l2l3l4d3kA/FBall-ØStatic load in kN
(see information)
80M 84368--3323248,554141416
80M 10436898-3323248,554141416
80M 12436898-3323248,554141416
80M 16681081481683323248,554161416
80M 146898148-3323248,554141416
80M 1658981381584323248,554242418
80M 20981381581984323248,554242418
80M 24981381581984323248,554242418
100M 84368--33232412,570141418
100M 10436898-33232412,570141418
100M 12436898-33232412,570141418
100M 146898148-33232412,570141418
100M 166810814816833232412,570161418
100M 16589813815843232412,570242425
100M 209813815819843232412,570242425
100M 249813815819843232412,570242425
125M 209813815819867234612,595242428
125M 16589813815867234612,595242428
125M 249813815819867234612,595242428

Build & Price

Foot diameter d1
Thread d2
Thread length l1
Type




Selected Part (How to order)

Weight: 0,138 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS compliant: Yes
This article conforms to RoHS, which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 150 Euro -> 10 % discount
from 250 Euro -> 20 % discount
from 350 Euro -> 30 % discount
All prices in accordance with our price list No. 51, valid from 1 February 2018, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.