GN 239.3 Hinges Plastic / without switch


ELESA original design
code: CFM

Accessories for profile systems

Standard elements in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Ganter standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

  • compatible with the common profile systems
  • for groove widths of 6, 8 and 10 mm
  • for profiles 30, 40 and 45 mm

Further information on products for profile systems:

Product description


The GN 239.3 hinges without switch have the same design like hinges GN 239.4 and serve as auxiliary hinge, e.g. for large doors requiring several hinges.


  • glass fiber reinforced
  • black, matte
  • temperature resistant up to 80 °C

Stainless Steel
AISI 303


Technical drawing

Hide technical drawing
GN 239.3 Hinges without switch, Plastic sketch

Article options / Table


SH2x2 bores for countersunk screw
Show / Hide columns

Build & Price

Width l1
Length l2

Mechanical features




Information without safety factor

Examples of calculation


→ see Operating instruction

Load F in N





Types SH, SL und SR with countersunk
for countersunk screws e.g. DIN 7991

Recommended torque

5 Nm (Screws M6)

Protection class


acc. to EN 60529

Switching principle, contact opening

Changeover contact, with positive opening

according to IEC 60947-5-1

Contact material

Silver alloy Ag 90 Ni 10

Operating travel diagram

The switching points are fix
at 6°. By reaching the lifespan,
it can rise up to 9°.
→ see operating instruction

Maximum operating frequency

600 operating cycles / hour

Mechanical life span

106 operating cycles

according to IEC 60947-5-1

Actuating speed

min. 2° / second, max. 90° / second

Electrical and safety features

Utilization category

DC 13: 24 Vdc / 4A or 127 Vdc / 0,3A
AC 15: 220 Vac / 4A or 440 Vac / 3A

acc. to EN 60947-5-2
acc. to EN 60947-5-1

Contact termination
4-pole plug M12
or cable with 2 m or 5 m length
Pin and cable assignment

Type of cable


Short-circuit current

1000 A

Rated insulation voltage

250 V

Short-circuit protection

6 A, 500 V, Typ gl

Ambient temperature

- 20 °C up to + 80 °C

Degree of pollution, external


Mission time (TM)

20 years

Number of cycles (B10 d)

2 000 000

Approvals, Conformities

Low-voltage switchgear and controlgear

CE declaration

EN 60947-1-5 : 2003 + A1/2009

The hinges with switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. Otto Ganter GmbH & Co. KG will assume no statutory liability for missing or incorrect information and for any consequences arising therefrom.

Selected Part (How to order)

Weight: 0,068 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 150,00 Euro -> 10 % discount
from 250,00 Euro -> 20 % discount
from 350,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 51, valid from 1 February 2018, plus VAT only valid for Germany.

CAD data


For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.

JW Winco, USA

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.


Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.