GN 139.6 Stainless Steel-Hinge without switch

Photo

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

  • corrosion-resistant
  • precise fit
  • environmentally friendly
Show all Stainless Steel products

Product description

Information

With the exception of the connector plug, the hinge without safety switch GN 139.6 do not differ in their external appearance from hinges with safety switch GN 139.5. With the concealed screw connection at the back, the hinge is also tamper-proof.

The compact design combines safety and attractive appearance.

The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.

Specification

Stainless Steel precision casting
  • AISI 316L (A4)
  • polished, Ra < 0,8 µm

Pin
Stainless Steel AISI 316L



RoHS

Technical drawing

Hide technical drawing
GN 139.6 Stainless Steel-Hinge, without switch sketch

Article options / Table

Show / Hide columns
l1l2l3l4l5h1h2m1m2m3m4
761264099,42215,531,58829419

Build & Price

Width l1
Length l2

Mechanical features

LA

LR0

LR90


Information with safety factor

Examples of calculation



Load
direction

→ see Operating instruction

F max.

2000 N

2000 N

2000 N

Fixing

from the back, 10 x threads M6, 8 mm deep

Recommended torque

10 Nm (Screws M6)

Protection class

IP67 (Type A / B, connector on the housing)
IP69K (Type C with connector cable)

acc. to EN 60529

Switching principle, contact opening

Slow-action contacts
force-fitted, with positive opening

according to IEC 60947-5-1

Contact material

Silver alloy

Operating travel diagram
(scheme)

The switching points are adjustable up to 2° in direction of 0°.
→ see operating instruction

Maximum operating frequency

1200 / hour

according to IEC 60947-5-1

Mechanical life span

106 operating cycles

acc. to IEC 60947-5-1

Actuating speed

min. 2° / second, max. 90° / second

Electrical features / Safety features

Utilization category

AC 15: 24 Vac / 2A / DC 13: 24 Vdc / 2A (connector plug)
AC 15: 250 Vac / 3A / DC 13: 250 Vdc / 0,3 A (cable)

acc. to EN 60947-5-1

Contacts, termination
8-pole connector M12 or
9 wire cable with
2 m or 5 m length
Pin and cable assignment

Type of cable

9x0,34 mm², PVC H05VV-F, black

acc. to IEC 60332-1

Short-circuit current

1000 A

acc. to EN 60947-5-1

Rated insulation voltage

30 V AC / 36 V DC

Short-circuit protection

2 A, 500 V, Type gG

Ambient temperature

- 25 °C up to + 80 °C

Degree of pollution, external

3

acc. to EN 60947-5-1

Safety parameters

B10: 1 000 000, B10 d: 5 000 000,
B10 / B10 d: 20%

acc. to EN ISO 13849-1

Approvals, Conformities, Applicability

Low-voltage switchgear and controlgear
CE declaration
EAC- and UL-certified

EN 60947-1/2007
EN 60947-1-5 : 2004 + A1/2009

Safety applications

up to SIL 3 / PL e

acc. to EN ISO 13849-1

Other important details and hints are given in the operating instruction for GN 139.5 hinges which are included with every hinge and which are also available as PDF downloads from Operating instructions.
The hinges with safety switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. Otto Ganter GmbH & Co. KG will assume no statutory liability for missing or incorrect information and for any
consequences arising therefrom.

Selected Part (How to order)

Weight: 0,909 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 150,00 Euro -> 10 % discount
from 250,00 Euro -> 20 % discount
from 350,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 51, valid from 1 February 2018, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.