GN 139.1 Hinges with safety switch with connector cable Zinc die casting / with connector cable

Photo

GN 139.1 Hinges with safety switch with connector cable Type: AK - Cable at the top
Type: AK - Cable at the top
GN 139.1 Hinges with safety switch with connector cable Type: AK - Cable at the top GN 139.1 Hinges with safety switch with connector cable Type: BK - Cable from the bottom GN 139.1 Hinges with safety switch with connector cable Type: CK - Cable from the back

Product description

Information

Hinges GN 139.1 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO).

The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable (see contact travel diagram).

Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.


Specification

Zinc die casting
plastic coated
silver metallic

Pin
Stainless Steel
AISI 303




RoHS

Technical drawing

Hide technical drawing
GN 139.1 Hinges with safety switch with connector cable sketch

Article options / Table

Type

AKCable at the top
BKCable from the bottom
CKCable from the back
Show / Hide columns
l1
small
hinge
wing

broad
hinge
wing
l2l3l4l5
small
hinge
wingl

broad
hinge
wing
l6
Cable length
in meters
h1h2m1m2m3
small
hinge
wing

broad
hinge
wing
497910130811530251222,571172750

Build & Price

Specifications

Width l1
Length l2
Type



Cable length l6

Mechanical features

Maximal load


Information with safety factor

Examples of calculation



Load
direction

→ see Operating instruction

l1= 49

1500 N

1000 N

1000 N

l1= 79

750 N

500 N

500 N

Fixing

from the back, 7 x threads M5, 6 mm deep

Recommended torque

5 Nm (Screws M5)

Protection class

IP67 / IP69K
(Mind the cable conduit!)

acc. to EN 60529

Switching principle, contact opening

Slow-action contacts
force-fitted, with positive opening

acc. to IEC 60947-5-1, K

Contact material

Silver alloy

Operating travel diagram
(scheme)

The switching points are adjustable
up to 4° in direction of 0°.

see operating instruction

Maximum operating frequency

600 operating cycles / hour

according to IEC 60947-5-1

one operating cycle includes one opening and one closing action

Mechanical life span

106 operating cycles

acc. to IEC 60947-5-1

Actuating speed

min. 2° / second, max. 90° / second

Electrical features / Safety features

Utilization category

DC 13: 24 Vdc / 2 A (with connector plug)
AC 15: 24 Vac / 2 A

acc. to EN 60947-5-1


Contact termination
8-pole connector M12

Pin and cable assignment

Type of cable

Type N 7 x0,5 mm2, jacket PVC H05VV-F

acc. to IEC 60332-1-2 et seqq.

Short-circuit current

1000 A

acc. to EN 60947-5-1

Rated insulation voltage

30 V AC / 36 V DC (connector plug) / 250 Vac (cable)

Short-circuit protection

2 A, 500 V, Type gG

Ambient temperature

- 25 °C up to + 80 °C

Degree of pollution, external

3

acc. to EN 60947-5-1

Mission time (TM)

20 years

acc. to EN ISO 13849-1

Number of cycles (B10 d)

5 000 000

acc. to EN 61820-2

Approvals, Conformities, Applicability

Low-voltage switchgear and controlgear
CE declaration
IMQ: CA02.03746
UL: E 131787

EN 60947-1/2007
EN 60947-1-5 : 2004 + A1/2009

Safety applications

until SIL 3 / PL e

acc. to EN ISO 13849-1

Other important details and hints are given in the operating instructions for GN 139.1 hinges which are included with every hinge and which are also available as PDF downloads fromOperating Instruction GN 139.1.
The hinges with safety switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. Otto Ganter GmbH & Co. KG will assume no statutory liability for missing or incorrect information and for any consequences arising therefrom.

Selected Part (How to order)

Weight: 0,511 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 Euro -> 10 % discount
from 275,00 Euro -> 20 % discount
from 375,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.