GN 2180 Edge protection seal profiles Material NBR / EPDM (UL-certified)

Photo

GN 2180 Edge protection seal profiles Material: EPDM - Ethylene propylene diene rubber<br />Type: D - Side seal profile
Material: EPDM - Ethylene propylene diene rubber
Type: D - Side seal profile
GN 2180 Edge protection seal profiles Material: EPDM - Ethylene propylene diene rubber<br />Type: D - Side seal profile GN 2180 Edge protection seal profiles Material: EPDM - Ethylene propylene diene rubber<br />Type: A - Upper seal profile GN 2180 Edge protection seal profiles Material: NBR - Acrylonitrile butadiene rubber<br />Type: D - Side seal profile

Product description

Information

GN 2180 edge protection seal profiles can be used to seal doors, covers and hatches. The profiles are pressed by hand onto the front of metal sheets and plates. The embedded clamp insert prevents detachment. Glue or other adhesives are not required.

When assembled, the profile should deform slightly according to w2. This ensures an optimal seal. Adherance to the guideline placement radii (r1... r4) is recommended in order to ensure a tight profile seal and to make assembly easier.

The NBR profiles are recommended for use in cases where contact with fuels, oils or coolants can occur.

EPDM profiles are certified according to UL 50 and UL 94-HB and are therefore approved for the US-American and the Canadian market.


Specification

Clamping profile / Sealing profile Ethylene propylene diene rubberEPDM
  • black
  • Clamping profile hardness 65 ±5 Shore A
  • Sealing profile hardness 25 ±5 Shore A
  • temperature resistant -40 °C to 100 °C
Acrylonitrile butadiene rubberNBR
(only for sizes h1 = 20,5 and 13)
  • black
  • Clamping profile hardness 60 ±5 Shore A
  • Sealing profile hardness 25 ±5 Shore A
  • temperature resistant -30 °C to 100 °C

Clamp insert
Steel wire polyester clamping band

RoHS compliant

Technical drawing

Technical drawing ausblenden
GN 2180 Edge protection seal profiles sketch

Article options / Table

Show / Hide columns
h1
Type A
h1
Type D
Cutting length l
in meter
a
Clamping area
bh2h3h4kr1r2r3r4w1w2
up to 50%
permissible
deformation



15,5-20500,8 - 2,58,59---805020-6,55
20,5-20501 - 3,51110,5---905030-107
-11,520500,8 - 2,58,7592,53,754304080408,56,75
-1320501 - 3,51110,752,254,54,7540501008011,258,75

Build & Price

Material


h1 (Type A)
h1 (Type D)
Type


Length l (in meters)

Selected Part (How to order)

Weight: 2,500 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS compliant: Yes
This article conforms to RoHS, which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 150 Euro -> 10 % discount
from 250 Euro -> 20 % discount
from 350 Euro -> 30 % discount
All prices in accordance with our price list No. 50, valid from 1 October 2016, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...