GN 653.2 Stainless Steel-Knurled screws with recessed stud for loss prevention


Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

  • corrosion-resistant
  • precise fit
  • environmentally friendly
Show all Stainless Steel products

Product description


Stainless Steel-Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.

When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.

Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.


Stainless SteelNI
  • AISI 303
  • visible face fine turned
  • matt shot-blasted


Technical drawing

Hide technical drawing
GN 653.2 Stainless Steel-Knurled screws with recessed stud for loss prevention sketch

Article options / Table

Show / Hide columns
d1l1a1a2a3d2d3d4 -0,2d5hkl2l3
M 4152-44-88-101683,24,55,53,552
M 4174-66-1010-121683,24,55,53,552
M 4196-88-1212-141683,24,55,53,552
M 4218-1010-1414-161683,24,55,53,552
M 5182,5-44-10,510,5-12201045,56,5462,5
M 5204-66-1212-14201045,56,5462,5
M 5226-88-1414-16201045,56,5462,5
M 5268-1212-1616-18201045,56,5462,5
M 6243-66-1313-1624124,86,58583
M 6266-88-1616-1824124,86,58583
M 6308-1212-1818-2224124,86,58583
M 63412-1616-2222-2624124,86,58583
M 8304-88-1616-2030166,58,596104
M 8348-1212-2020-2430166,58,596104
M 83812-1616-2424-2830166,58,596104
M 84216-2020-2828-3230166,58,596104

Build & Price


Thread d1

Selected Part (How to order)

Weight: 0,006 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article conforms to RoHS, which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 150 Euro -> 10 % discount
from 250 Euro -> 20 % discount
from 350 Euro -> 30 % discount
All prices in accordance with our price list No. 51, valid from 1 February 2018, plus VAT only valid for Germany.

CAD data


For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...


Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.