GN 953 Position indicators digital indication / counter mechanism

Photo

GN 953 Position indicators, digital, 5 digits Installation (Front view): AN - on the chamfer, above
Color: OR - orange, RAL 2004
ELESA original design
code: DD52R
Installation (Front view): AN - on the chamfer, above
Color: OR - orange, RAL 2004
GN 953 Position indicators, digital, 5 digits Installation (Front view): AN - on the chamfer, above
Color: OR - orange, RAL 2004 GN 953 Position indicators, digital, 5 digits Installation (Front view): AN - on the chamfer, above
Color: GR - gray, RAL 7035 GN 953 Position indicators, digital, 5 digits Installation (Front view): AR - on the chamfer, below
Color: GR - gray, RAL 7035 GN 953 Position indicators, digital, 5 digits Installation (Front view): AR - on the chamfer, below
Color: OR - orange, RAL 2004 GN 953 Position indicators, digital, 5 digits Installation (Front view): FN - in the front, above
Color: GR - gray, RAL 7035 GN 953 Position indicators, digital, 5 digits Installation (Front view): FN - in the front, above
Color: OR - orange, RAL 2004 GN 953 Position indicators, digital, 5 digits Installation (Front view): FR - in the front, below
Color: GR - gray, RAL 7035 GN 953 Position indicators, digital, 5 digits Installation (Front view): FR - in the front, below
Color: OR - orange, RAL 2004

Product description

Information

Position indicators GN 953 have a direct coupled drive with digital indication.

The two body parts are ultra-sonically welded, thus the housing is particularly sturdy and compact.

The foam rubber seal prevents the transmission of vibration to the counter mechanism and also has sealing properties.

The numbers are easily legible and they are even enlarged by the magnifying effect of the sight glass.


Specification

Housing
Plastic (Polyamide PA)
  • orange, RAL 2004OROR
  • gray, RAL 7035GRGR
  • temperature resistant up to 80 °C
  • oil and solvent resistant

Numbers white,
number wheels for integers black,
for decimal numbers red
with addionally scale

Hollow shaft
Steel, blackened

Grub screw DIN 916
with internal hexagon and serrated point


RoHS

On request

with Stainless Steel-Hollow shaft
other counter indication

Technical drawing

Hide technical drawing
GN 953 Position indicators, digital, 5 digits sketch

Article options / Table

Type

RNumbers ascending clockwise
LNumbers ascending anti-clockwise

Installation (Front view)

ANon the chamfer, above
ARon the chamfer, below
FNin the front, above
FRin the front, below
Show / Hide columns
Counter
Indication after one
spindle revolution

corresponds
to thread pitch

max. revolutions
per minute
000.50500,5500
001.001001250
0001.01011500
0002.02021250
0002.5252,51000
0003.0303830
0004.0*404625
0005.0505500
0006.0606415
0010.010010250
* Suitable for linear actuators GN 291 Ø 40 and Ø 50.

Build & Price

Counter
Installation (Front view)




Type


Color
GR
OR

Installation instructions

Before installation of the position indicator a bore for the torque limiting contact point is to be placed (see left).

With the Adapter bushings GN 952.1 the hollow shaft (with Bore 20 H7) of the position indicator can be adapted to fit the spindle.

The mounting of the position indicator is via the torque limiting contact point which is connected to the hollow spindle and secured with a grub screw.
Before completing the installation, turn the spindle to the starting point (0) position and zero the position indicator.

With Clamping plates GN 953.6 spindles can be clamped and secured after adjusting.

Operating principle

The position indicator is equipped with a hollow shaft that is slid directly onto the spindle and is connected to the spindle by a grub screw. The spindle rotations are transmitted to a counter directly by a gearbox. For torque support, a pin of the housing projects into a hole made on the machine side, establishing the position relative to the mounting site.

The transmission ratio and counting direction of the counter are determined by the pitch of the adjusting spindle. The indicated value after one turn starting from the 0 position serves as a characteristic value. Decimal places are indicated in red.
Position indicators are also suitable for motor-driven spindles up to a maximum speed.

Selected Part (How to order)

Weight: 0,097 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 Euro -> 10 % discount
from 275,00 Euro -> 20 % discount
from 375,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.