GN 323.8 Disk handwheels for position indicators GN 000.8 / GN 000.3

Photo

GN 323.8 Disk handwheels, for position indicators GN 000.8 / GN 000.3 Type: R - with revolving handle
Type: R - with revolving handle
GN 323.8 Disk handwheels, for position indicators GN 000.8 / GN 000.3 Type: R - with revolving handle GN 323.8 Disk handwheels, for position indicators GN 000.8 / GN 000.3 Type: A - without handle

Product description

Information

Handwheels GN 323.8 have a recessed hub to accept position indicators GN 000.8 / GN 000.3.

The hub dimensions (for fitting) correspond to those of disc handwheels GN 323 and/or handwheels to DIN 950.



Specification

Aluminum gravity die casting
  • Hub machined
  • Rim turned on all sides
  • Wheel body
    plastic coated
  • black, textured finish

Rim concentric and
square to bore IT 12

RoHS compliant

Accessory

Position indicators GN 000.8 / GN 000.3 to be ordered separately.

Technical drawing

Hide technical drawing
GN 323.8 Disk handwheels, for position indicators GN 000.8 / GN 000.3 sketch

Article options / Table

Bore code:

Bwithout keyway
Kwith keyway

Type

Awithout handle
Rwith revolving handle
Show / Hide columns
d1d2 H7
Bore
d3d4d5bl1l2l3Øfor position
indicators
GN 000.8
Size


GN 000.3
Size
80102620,5561316483,51642-
100102820,5561417583,51842-
125123125,5761518614226060
160143629761820674246060
2001842337920,524754,5256060
25022483780232881,54,5256060

Build & Price

Outside diameter d1
Bore code


Bore diameter d2
Type


Installation sequence

1. Install the handwheel to the spindle and fix it with the grub screw or keyway/countersunk washer.
2. Turn the spindle to the starting point (0-position).
3. Move position indicator „by hand“ to the 0-position before mounting it.
4. Install the position indicator into the recess of the hub and fix it with a screw.
Do not apply unnecessarily excessive torque to avoid deformation of the housing!
5. Rotate the handwheel and ascertain that the starting point of the spindle is aligned with the 0-position of the two
pointers (GN 000.8) respectively pointer.
Should that not be the case, the screw has to be loosened and the position indicator adjusted. Tighten the screw
again.

Selected Part (How to order)

Weight: 0,190 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS compliant: Yes
This article conforms to RoHS, which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 150 Euro -> 10 % discount
from 250 Euro -> 20 % discount
from 350 Euro -> 30 % discount
All prices in accordance with our price list No. 51, valid from 1 February 2018, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.