GN 327 Safety handwheels Aluminum, fixed bearing flange

Photo

GN 327 Safety handwheels, fixed fearing flange Type: A - without handle
Type: A - without handle
GN 327 Safety handwheels, fixed fearing flange Type: A - without handle GN 327 Safety handwheels, fixed fearing flange Type: D - with revolving handle

Product description

Information

GN 327 safety handwheels feature the ultimate in health and safety at work standards because the handwheel, if disengaged, is mounted on a fixed component, the bearing flange. The wheel is fully disengaged from the rotating shaft.

The bearing flange can also accept the bearing of the shaft via the bearing bushing (identification no. 1). This bearing bushing is a dry bearing (DU bushing). Normally, the shaft has a separate bearing and the bearing bushing serves to center the bearing flange.

Centering can also be effected by a centering ring (identification no. 2) if the appropriate bore hole has been made at the machine side. In this case there is no need for the bearing bushings and no bearing friction (heating) will occur.



Specification

Handwheel body
Aluminum
  • Rim turned and polished

Coupling elements
  • Steel, nitrided
  • Bearing surface ground resp.
    PTFE-coated
  • Bearing flange blackened

Revolving handles GN 598
  • Plastic, Duroplast
    black, shiny finish
  • Spindle steel
    zinc plated, blue passivated

RoHS

Technical drawing

Hide technical drawing
GN 327 Safety handwheels, fixed fearing flange sketch

Article options / Table

Type

Awithout handle
Dwith revolving handle

Identification no.

1with bearing bushing
2with centring ring
Show / Hide columns
d1d2 H7
Bore with keyway
bl1l2rØ
Handle
160K 14K 16K 18K 20186682,57126
200K 14K 16K 18K 2020,56882,58926

Build & Price

Handwheel diameter d1
Bore d2
Type


Identification no.


Details hub with coupling attachments

Assembly instructions

Shaft bushing and countershaft pulley are delivered in two separate components. Before assembly, make sure that the shaft bushing can be pushed smoothly and free-moving over the shaft.


Proper function is guaranteed only if:
- shaft bushing and bearing surface are level with each other
- the shaft axis lies at a right angle to the bearing surface on the machine side.


Design with bearing bushing (identification no. 1):

Push the handwheel and the shaft bushing at the same time over the shaft, bolt down the bearing flange, and fix the shaft bush axially with the countershaft pulley.

Design with centring ring (identification no. 2):

The handwheel can be bolted at once through the centring ring above the bearing flange. Then push the shaft bushing onto the shaft and fix it axially with the countershaft pulley.

Application Guide

The relevant health and safety at work provisions state that handwheels must be attached to spindles such that they are not turned along together with the machine drive assembly. Safety handwheels meet this requirement:

- If not in operation, the wheel is disengaged. Shifting it in axial direction (pushing or pulling) will intermesh two serrated bushings, formlocking the wheel with the shaft.

- After releasing, the wheel will disengage again automatically.

A number of user notices are listed below. These notices are non-binding and given without liability. They do not constitute a warranty of proper function. The user must in any case determine whether the safety handwheels are suitable for the intended purpose and use.

The safety handwheels described under 1. to 3. above are characterised by the fact that they require no special machine-side measures for attaching. They are simply pushed over the shaft. However, the inevitable bearing friction generates a link between shaft and handwheel which needs to be kept in mind as specified above.
For applications with very high rotary speed, ultimate levels of safety at work and under continuous operation, the safety handwheel with fixed bearing flange is the best possible solution. The separate bearing configuration means that the user notices given for types 1. to 3. do not apply.
However, this safety handwheel is more complex, with a number of requirements to be met at the machine side.

Selected Part (How to order)

Weight: 1,706 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 150,00 Euro -> 10 % discount
from 250,00 Euro -> 20 % discount
from 350,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 51, valid from 1 February 2018, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den untern genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue 16.0 with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.