with rivet ball shank

DIN 71802 Angled ball joints

Form

B	with rivet ball shank, without safety catch
BS	with rivet ball shank, with safety catch

d₁ H9/h9	d₂	d₂ Left hand thread	l₂		d₄h11	d₅	l₃	l₄	t min.	sw	min. pull-off force in N
8	M 5	M 5L	4	7,5	5	8	9	22	10,5	7	30
10	M 6	M 6L	4,5	8	6	10	11	25	11,5	8	40
13	M 8	M 8L	5	10	8	13	13	30	14	11	60
16	M 10	M 10L	6	13	10	16	16	35	15,5	13	80
16	M 12	M 12L	6	13	10	16	16	35	15,5	13	80
19	M 14F	M 14FL	12	18	14	22	20	45	21,5	16	100

Specification

Steel

Tensile strength class 5 (500N/mm²)
zinc plated, colourless passivated

Ball
Steel

hardened
Ball seat lubricated

ISO-Fundamental tolerances

RoHS compliant

On request

smooth specification
(Ball seat with play)

Ball studs DIN 71803

Ball sockets DIN 71805

Axial joints
(ball socket and ball shank in one axis)

Information

Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.

The angle of rotation for the type with safety catch (Types CS, BS) ist 15°, without safety catch (Types C, B) is 18°.

For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.

To protect the angled ball point, a dust cap GN 710 can be added.

The hexagon nut is part of the angled ball joints.

Dust caps GN 710 have to be ordered seperately.

How to order