multi part assembly
GN 194 T-angle connector clamps
| Id. No. 1 with 4 clamping screws DIN 912, zinc plated |
| Id. No. 2 with 4 Stainless Steel-clamping screws DIN 912 |
| d1 Bore B | s1 Square V | d2 Bore B | s2 Square V | k Clamping length | d3 Clamping screw | l1 | l2 | l3 | m | Clamping lever for d3 |
|---|---|---|---|---|---|---|---|---|---|---|
| B 20 | V20 | B 20 | V20 | 50 | M 8 | 120 | 68 | 46 | 85 | GN 911-M8-40 |
| B 25 | V25 | B 25 | V25 | 50 | M 8 | 120 | 68 | 46 | 85 | GN 911-M8-40 |
| B 30 | V30 | B 30 | V30 | 50 | M 8 | 120 | 68 | 46 | 85 | GN 911-M8-40 |
| B 30 | V30 | B 30 | V30 | 60 | M 8 | 141 | 79 | 59 | 101,5 | GN 911-M8-55 |
| B 32 | - | B 32 | - | 60 | M 8 | 141 | 79 | 59 | 101,5 | GN 911-M8-55 |
| B 35 | V35 | B 35 | V35 | 60 | M 8 | 141 | 79 | 59 | 101,5 | GN 911-M8-55 |
| B 40 | V40 | B 40 | V40 | 60 | M 8 | 141 | 79 | 59 | 101,5 | GN 911-M8-55 |
| B 40 | V40 | B 40 | V40 | 76 | M 10 | 176 | 98 | 70 | 126 | GN 911-M10-63 |
| B 42 | - | B 42 | - | 76 | M 10 | 176 | 98 | 70 | 126 | GN 911-M10-63 |
| B 45 | V45 | B 45 | V45 | 76 | M 10 | 176 | 98 | 70 | 126 | GN 911-M10-63 |
| B 48 | - | B 48 | - | 76 | M 10 | 176 | 98 | 70 | 126 | GN 911-M10-63 |
| B 50 | V50 | B 50 | V50 | 76 | M 10 | 176 | 98 | 70 | 126 | GN 911-M10-63 |
Specification
Aluminium
plastic coated
| black | SW | RAL 9005 | |
| textured finish | |||
| blank | BL | ||
matt shot-blasted
Clamping bores not machined
Socket cap screws DIN 912
Steel zinc plated / St. Steel
German material No. 1.4301
Hexagon nuts DIN 985
Steel zinc plated / St. Steel
German material No. 1.4301
Adjustable
clamping lever GN 911
Zinc die casting
Inserts / Distance bushings
Stainless Steel
German Material No. 1.4305
Information
The clamping bores of the T-angle connector clamps GN 194 are not machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
Within the same nominal size the T-angle con-nector clamp bores can be supplied with the bores d1 and d2 and square bores s1 and s2 i.e. in combination with d1 and s2 or s1 and d2.
The standard clamping bolts are socket cap screws DIN 912. They can be used in place of adjustable clamping levers GN 911 (see table of dimensions).
How to order
T-angle connector clamp
GN 194-B42-B42-76-1-BL
Code No.
194
d1 (s1)
B42
d2 (s2)
B42
k
76
Id. No.
1
Finish
BL
Adjustable clamping levers GN 911 have to be ordered separately. They are supplied disassembled.