GN 163 Base plate connector clamps

Id. No. 1 with clamping screw DIN 912, zinc plated

Id. No. 2 with Stainless Steel-clamping screw DIN 912

d1 Bore B	k Clamping length	d2	d3 Clamping thread	l1	l2	t	x1	x2	y1	y2	Clamping lever for d3
B 20	50	6,5	M 8	52	40	7	60	42	60	42	GN 911-M8-32
B 25	50	6,5	M 8	52	40	7	60	42	60	42	GN 911-M8-32
B 30	50	6,5	M 8	52	40	7	60	42	60	42	GN 911-M8-32
B 30	70	8,5	M 10	68	56	10	90	64	90	64	GN 911-M10-40
B 32	70	8,5	M 10	68	56	10	90	64	90	64	GN 911-M10-40
B 35	70	8,5	M 10	68	56	10	90	64	90	64	GN 911-M10-40
B 40	70	8,5	M 10	68	56	10	90	64	90	64	GN 911-M10-40
B 40	85	11	M 10	77,5	65	14	105	74	105	74	GN 911-M10-55
B 42	85	11	M 10	77,5	65	14	105	74	105	74	GN 911-M10-55
B 45	85	11	M 10	77,5	65	14	105	74	105	74	GN 911-M10-55
B 48	85	11	M 10	77,5	65	14	105	74	105	74	GN 911-M10-55
B 50	85	11	M 10	77,5	65	14	105	74	105	74	GN 911-M10-55
B 55	100	11	M 10	92	80	14	125	89	125	89	GN 911-M10-55
B 60	100	11	M 10	92	80	14	125	89	125	89	GN 911-M10-55

Specification

Aluminium

plastic coated

	black	SW	RAL 9005
textured finish

	blank	BL

matt shot-blasted

Clamping bore machined

Socket cap screws DIN 912

Steel zinc plated / St. Steel

German material No. 1.4301

Hexagon nuts DIN 985

Steel zinc plated / St. Steel

German material No. 1.4301

Adjustable

clamping lever GN 911

Inserts / Distance bushings

Stainless Steel

German Material No. 1.4305

Information

The clamping bores of the base plate connector clamps GN 163 are machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.

The standard clamping bolts are socket cap screws DIN 912. They can be used in place of adjustable clamping levers GN 911 (see table of dimensions).

Clamping kits GN 911 (adjustable, for clamp connectors)

Construction tubings GN 990 (for tube clamp connectors)

Base plate linear actuator connectors GN 163.1 (Construction - Base plate connector clamps)