GN 133 Two-way connector clamps

Id. No. 1 with 2 clamping screws DIN 912, zinc plated

Id. No. 2 with 2 Stainless Steel-clamping screws DIN 912

d1 Bore B	d2 Bore B				d3 Clamp. thread	d4 Clamp. thread	k1 Clamp. length	k2 Clamp. length	l1	l2	l3	m	Clamping lever for d3	for d4
B 20	B 12	B 14	B 16	B 18	M 8	M 6	40	36	81,5	40	26	27	GN 911-M8-32	GN 911-M6-25
B 25	B 12	B 14	B 16	B 18	M 8	M 6	40	36	81,5	40	26	27	GN 911-M8-32	GN 911-M6-25
B 30	B 12	B 14	B 16	B 18	M 8	M 6	40	36	81,5	40	26	27	GN 911-M8-32	GN 911-M6-25
B 40	B 20	B 25	B 30	-	M 10	M 8	65	59	122	65	40	45	GN 911-M10-55	GN 911-M8-32
B 42	B 20	B 25	B 30	-	M 10	M 8	65	59	122	65	40	45	GN 911-M10-55	GN 911-M8-32
B 45	B 20	B 25	B 30	-	M 10	M 8	65	59	122	65	40	45	GN 911-M10-55	GN 911-M8-32
B 48	B 20	B 25	B 30	-	M 10	M 8	65	59	122	65	40	45	GN 911-M10-55	GN 911-M8-32
B 50	B 20	B 25	B 30	-	M 10	M 8	65	59	122	65	40	45	GN 911-M10-55	GN 911-M8-32

Specification

Aluminium

plastic coated

black textured finish SW

blank BL

matt shot-blasted

Clamping bores machined

Socket cap screws DIN 912

Steel zinc plated / St. Steel

German material No. 1.4301

Hexagon nuts DIN 985

Steel zinc plated / St. Steel

German material No. 1.4301

Adjustable

clamping lever GN 911

Inserts / Distance bushings

Stainless Steel

German Material No. 1.4305

Information

The clamping bores of the two-way connector clamps GN 133 are machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.

The standard clamping bolts are socket cap screws DIN 912. They can be used in place of adjustable clamping levers GN 911 (see table of dimensions).

Special executions:

- different combinations of bores d1 / d2

Construction tubings GN 990 (for tube clamp connectors)

Clamping kits GN 911 (adjustable, for clamp connectors)