for linear actuators Ø 30, Ø 40, Ø 50 and Ø 60

GN 163.1 Base plate linear actuator connectors

Base plate linear actuator connectors GN 163.1 thumbnail

Base plate linear actuator connectors GN 163.1 sketch

Identification no.

1	with one clamping screw DIN 912, zinc plated
2	with one Stainless Steel-clamping screw DIN 912

d₁ Bore B without slider bush	Bore G with slider bush	d₂	d₃ Clamping screw	d₄ Mounting screw on the follower	k Clamping length	t	x₁	x₂	y₁	y₂	Clamping lever for d₃
B 30	G 30	6,5	M 8	M 4	50	7	60	42	60	42	GN 911-M8-32
B 40	G 40	8,5	M 10	M 5	70	10	90	64	90	64	GN 911-M10-40
B 50	G 50	11	M 10	M 6	85	14	105	74	105	74	GN 911-M10-55
B 60	G 60	11	M 10	M 8	100	14	125	89	125	89	GN 911-M10-55

Specification

Aluminium
plastic coated
black, RAL 9005, textured finishSW

Sliding bore machined

Sliding bush insert Polyamide

Socket cap screws DIN 912
Steel zinc plated / Stainless Steel
German Material No. 1.4301

Hexagon nuts DIN 985
Steel zinc plated / Stainless Steel
German Material No. 1.430

Adjustable
clamping lever GN 911

Zinc die casting
Inserts / Distance bushings
Stainless Steel
German Material No. 1.4305

RoHS compliant

Information

Base plate linear actuator connectors GN 163.1 are normally supplied only in connection with a mounted linear actuator and for function control.

By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).

The standard clamping bolts are socket cap screws DIN 912. They can be used in place of adjustable clamping levers GN 911 (see table of dimensions).

How to order