Our Service-Team is available from Mo.-Fr. | 7.00 AM - 17.30 PM under:
+49 7723 6507- 0
.
with electrical oil level monitoring
GN 650.3 Oil level indicators
ELESA Original design HCX/E
Type
| NO | Normally open |
| NC | Normally closed |
| l1 | b | d | h | k | l2 | l3 | l4 | l5 | l6 | l7 | l8 | s ≈ max. Wall thickness |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 127 | 31 | M12 | 40 | 50 | 23 | 101 | 169 | 13 | 25 | 18 | 26 | 12 |
Filter combination produces no result.
Specification
Body Plastic
crystal-clear Polyamide (PA-T)
Contrast screen Aluminium
Float Plastic
black
O-rings rubber NBR (Perbunan)
Set screw and nuts
Steel, zinc-plated, blue passivated
RoHS compliant
crystal-clear Polyamide (PA-T)
- ageing resistant
- high mechanical strength
- temperature restistant up to 90 °C
- solvent resistant,
but not suitable for alcohol - avoid contact with hot water
Contrast screen Aluminium
- white lacquered
- with two black marking lines
Float Plastic
black
O-rings rubber NBR (Perbunan)
Set screw and nuts
Steel, zinc-plated, blue passivated
RoHS compliant
Information
By using the oil level indicators GN 650.3 the liquid level cannot only be seen but an electrical impulse can also be transmitted when the oil level has dropped below a specified limit.
For this purpose there is a magnetic float in the indicator which at a specified liquid level (liquid min. level) will close or open a contact in a REED switch.
The polyamide body consists of two parts which are ultrasonically welded together.
Oil level indicators GN 650.3 can also be used in pressurised containers. Pressure test results regarding resistance under pressure are available.
see also...
| How to order |
| ||||
GN 650.3-127-NC |
This could also be interesting...
RoHS compliant:
-
-
Weight:
-
-
