GN 612 Cam action indexing plungers

Type A without lock nut, without plastic cover

Type B without lock nut, with plastic cover

Type AK with lock nut, without plastic cover

Type BK with lock nut, with plastic cover

d1 Pin -0,02/-0,04 Bore H7	d2	d2_2	d3	l1	l2	l3 +1,5	l4	l5	Spring load initial	N ~ end
*)4	M 10	M 10 x 1	10	32	6	19	21	-	8,5	25
*)5	M 10	M 10 x 1	10	32	6	19	21	-	8,5	25
5	M 12	M 12 x 1,5	12	47	8	26	26	32	9	21
*)6	M 10	M 10 x 1	10	32	6	19	21	-	8,5	25
6	M 12	M 12 x 1,5	12	47	8	26	26	32	9	21
6	M 16	M 16 x 1,5	16	56	10	30	32	42	12	32
8	M 12	M 12 x 1,5	12	47	8	26	26	32	9	21
8	M 16	M 16 x 1,5	16	56	10	30	32	42	12	32
8	M 20	M 20 x 1,5	20	69	12	36	37	52	21	58
10	M 16	M 16 x 1,5	16	56	10	30	32	42	12	32
10	M 20	M 20 x 1,5	20	69	12	36	37	52	21	58
12	M 20	M 20 x 1,5	20	69	12	36	37	52	21	58

Specification

Steel

blackened

Plunger

fine turned and nitrided

Plastic cover

Technopolymer (Polyamide PA)

black, matt

*) This sizes d1 only available as type A and type AK.

ISO-Fundamental Tolerances

Information

Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself.

A notch is provided in either position to prevent the lock from rotating.

St. Steel-Cam action indexing plungers GN 612

Mounting blocks GN 612.1 (for cam action indexing plungers GN 612, GN 712, GN 712.1 for indexing plungers GN 613)

Cam action indexing plungers GN 612.2 (with flange for surface mounting)

Cam action indexing plungers GN 612.3 (for weld mounting)