for weld mounting
GN 612.3 Cam action indexing plungers
| Type A without plastic cap | Type B with plastic cap |
| d Plunger -0,02/-0,04 Bore H7 | s | l1 | l2 | l3 | l4 | l5 | Spring load initial | N ~ end |
|---|---|---|---|---|---|---|---|---|
| 6 | 16 | 56 | 10 | 30 | 32 | 42 | 12 | 32 |
| 8 | 16 | 56 | 10 | 30 | 32 | 42 | 12 | 32 |
| 8 | 20 | 69 | 12 | 38 | 37 | 52 | 21 | 58 |
| 10 | 16 | 56 | 10 | 30 | 32 | 42 | 12 | 32 |
| 10 | 20 | 69 | 12 | 38 | 37 | 52 | 21 | 58 |
| 12 | 20 | 69 | 12 | 38 | 37 | 52 | 21 | 58 |
Specification
Steel
weldable
blackened
Plunger nitrided
Plastic cover
Technopolymer (Polyamide PA)
black, matt
Information
Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself.
A notch is provided in either position to prevent the lock from rotating.
The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.
How to order
Cam action indexing plunger
GN 612.3-10-16-A
Code No.
612.3
d
10
s
16
Type
A