GN 348 Insert bushes
| s1 | s2 | d | l1 | l2 | t | Tube outside | dimensions inside | Wall thickness | Static load [N] (see information) |
|---|---|---|---|---|---|---|---|---|---|
| 30 | 27 | M 10 | 33 | 6 | 20 | 30 | 27 | 1,5 | 5000 |
| 30 | 27 | M 12 | 33 | 6 | 20 | 30 | 27 | 1,5 | 5000 |
| 30 | 27 | M 16 | 33 | 6 | 20 | 30 | 27 | 1,5 | 5000 |
| 40 | 36 | M 10 | 43 | 8 | 20 | 40 | 36 | 2 | 5000 |
| 40 | 36 | M 12 | 43 | 8 | 20 | 40 | 36 | 2 | 5000 |
| 40 | 36 | M 16 | 43 | 8 | 20 | 40 | 36 | 2 | 5000 |
| 50 | 45 | M 16 | 55 | 10 | 30 | 50 | 45 | 2,5 | 5000 |
| 50 | 45 | M 20 | 55 | 10 | 30 | 50 | 45 | 2,5 | 5000 |
| 50 | 46 | M 16 | 55 | 10 | 30 | 50 | 45 | 2 | 5000 |
| 50 | 46 | M 20 | 55 | 10 | 30 | 50 | 45 | 2 | 5000 |
Specification
Plastic
Technopolymer (Polyamide PA)
Technopolymer (Polyamide PA)
glass fibre reinforced
black, matt
temperature resistant up to 120° C
Bush brass
nickel plated
Information
Insert bushes GN 348 offer the possibility of mounting screws in profiled square tubes. A typical example is the connection of a square tube with a levelling foot.
The figures given in the table for static loads are nominal values. Exceeding these values can lead to permanent deformation or breaking of the insert bush.
The values were arrived at by a series of tests whereby a specific number of insert bushes were subjected for a limited time to a vertical static load.
How to order
ELESA-Insert bush
GN 348-30-27-M12
Code No.
348
s1
30
s2
27
d
M12
Manufacturer Information
original design code: ND.QThe Code GN 348 is valid for Germany only