GN 607.1 Indexing plungers
| Type A without locknut |
| Type AK with locknut |
| d1 Plunger -0,02/-0,04 Bore H7 | d2 | d3 | e~ | l1 | l2 min. | l3 -0,15 | l4 | A/F | Spring load initial | N ~ end | Axial load [N] |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6 | M 12 x 1,5 | 25 | 19,6 | 45 | 6 | 10 | 5 | 17 | 7 | 18 | 400 |
| 8 | M 16 x 1,5 | 31 | 21,9 | 54 | 8 | 12 | 6 | 19 | 14 | 24 | 500 |
Specification
Steel ST
blackened
Plunger hardened
Knob Plastic
Technopolymer (Polyamide PA)
black matt finish
not removable
Information
Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees "after being retracted.
The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.
A feature of GN 607.1 is its reduced dimension. The locking tab is an integral part of the knob thus giving reliable operation at all times.
How to order
Indexing plunger
GN 607.1-6-A-ST
Code No.
607.1
d1
6
Type
A
Steel
ST
Distance rings GN 609 are to be ordered separately.