with DIN-re-fill symbol
GN 747 Threaded plugs
| Type A without dipstick | Coding 1 without vent drilling |
| Type B with dipstick | Coding 2 without vent drilling |
| d1 | d2 Vent drilling | d3 | l1 | l2 | l3 | s | e | |||
|---|---|---|---|---|---|---|---|---|---|---|
| *)G 1/8 | *)M 10 x 1,5 | *)M 12 x 1,5 | - | 2 | 15 | 9 | 15 | 120 | 19 | 21,5 |
| *)G 1/4 | *)M 14 x 1,5 | - | - | 2 | 15 | 9 | 15 | 120 | 19 | 21,5 |
| G 3/8 | M 16 x 1,5 | - | - | 2 | 17,5 | 9 | 15 | 120 | 22 | 25 |
| G 1/2 | M 18 x 1,5 | M 20 x 1,5 | - | 2 | 21 | 11 | 18 | 195 | 26 | 29,5 |
| G 3/4 | M 22 x 1,5 | M 25 x 1,5 | M 26 x 1,5 | 2 | 25 | 12 | 20 | 195 | 32 | 36,5 |
| G 1 | M 35 x 1,5 | - | - | 2 | 31 | 13 | 22 | 195 | 38 | 44 |
| G 1 1/4 | M 40 x 1,5 | - | - | 2 | 38 | 14 | 24 | 195 | 46 | 52,5 |
| G 11/2 | - | - | - | 2 | 46 | 15 | 26 | 195 | 55 | 63 |
Specification
Plastic
Technopolymer (Polyamide PA)
Technopolymer (Polyamide PA)
glass fibre reinforced
black, matt
Temperature resistant up to 130° C
Rubber seal
NBR (Perbunan)
Dipstick in steel
phosphated
*) This sizes are not available in specification B-2.
Information
The dipstick of the threaded plugs GN 747 has two flat sides on which the MAX-MIN oil levels can easily be marked.
For these threaded plugs there are self adhesive, matt anodized (0.3 mm thick) aluminium discs available.
Dipsticks in special lengths or marking lines are available on request.
How to order
ELESA-Threaded plug
GN 747-M20x1,5-A-1
Code No.
747
d1
M20x1,5
Type
A
Coding
1
Manufacturer Information
original design code: The Code GN 747 is valid for Germany only